Universal Power Clamps

COMPLETE INTERCHANGEABILITY with LAP/LNP series:


Interchangeable mounting

Interchangeable overall dimensions

Interchangeable models and options

Same inner linkage mechanism

 

 

 

ADVANTAGES FOR THE END CUSTOMER:

 

UNIVERSAL series:

 

      Allows opening angle to be adjusted from 0? to 125? for the 40mm bore and from 0? to 135? for the 50, 63 and 80mm bore

 

Allows to set the opening angle with or without air supply 

 

Reduces stock requirements: one UNIVERSAL unit can be used to set all possible opening angles

 

Can be used as direct replacement for LAP/LNP series

 

Increases productivity and decreases cycle time by being able to set the clamp to the minimum required opening angle

 

Guarantees the same reliability recognized by the market thanks to the use of the already proven inner linkage mechanism of the LAP/LNP series

 

Provides pnumatic ports on both sides of the cylinder

  

Is equipped with a UNIVER original all metal construction optical sensor, which is IP65 and includes a swivel connector which can be orientated in 0? or 90?

 

Working pressure  4 - 10 bar
Release pressure 4 bar min.
Ambient temperature -20 - 80 °C
Fluid  filtered air, lubricated or non lubricated


Carriage is kept in position in both directions
Easy assembly, it can be mounted indifferently on both sides of the carriage