EDF Double Carriage

EDF Double Carriage

EDF Double Carriage drives use the same flat bodied profile as the EDF Single Carriage version but is fitted with two carriages and two bearing slides (option H). When operated the two carriages travel in opposite directions making it ideal for automatic door operation. Special versions which allow both carriages to move in the same direction are available upon request, this version is more suited to handling heavier duty, wider loads. EDF Double Carriage models are available in size 42mm only. Interface plates are available for all types of electrical motor/gearbox combinations and supplied as a kit to include motor shaft extension and drive coupling.

Type Linear drive with twin carriage for X Y axis
Profile Sizes 42 x 75mm
Mounting T slots on either side of extrusion profile
Maximum Stroke Length 3 metres
Minimum Stroke Length 100 mm
Operating Temperature Max + 80¡ Min -10¡ (check drive motor techincal data)
Speed 3 metres/sec
Pully Drive Ratio (mm) 130 mm
Number of Belt Pulley Teeth 26
Maximum RPM (g/min) 2000
Bearing Rail Types H L
Number of Bearing Rails 2 1
Base Weight (zero stroke) 3.7 Kg 3.5 Kg
Weight per 100mm of Stroke 0.5 Kg 0.5 Kg
Zero Load Torque 1.4 Nm 1.2 Nm
Maximum Radial Load on Input Shaft 250 N 250 N