EDB Series

EDB Series

EDB drives are ideal for X Y axis applications the extrusion profile is available in sizes 42, 55 and 80mm. The profile and forms the backbone of the Univer range providing an ideal strength/weight ratio. A single bearing rail with two bearing blocks provide an accurate slide mechanism within the extrusion, eliminating the possibility of slide contamination. Interface plates are available for all types of electrical motor/gearbox combinations and supplied as a kit to include motor shaft extension and drive coupling.

Type Single carriage linear drive for X Y axis
Profile Sizes 42, 55 and 80mm
Mounting T slots on either side of extrusion profile
Maximum Stroke Length 2 metres
Minimum Stroke Length 100 mm
Operating Temperature Max + 80¡ Min -10¡ (check drive motor techincal data)
Speed 3 metres/sec
Series EDB-42 EDB-55 EDB-80
Pully Drive Ratio (mm) 90 120 160
Number of Belt Pulley Teeth 18 24 32
Maximum RPM (g/min) 2000 2500 1150
Base Weight at zero stroke (Kg) 1.4 4.4 5.9
Weight per 100mm of Stroke (Kg) 0.18 0.34 0.49
Zero Load Torque (Nm) 0.8 1 1.2
Maximum Radial Load on Input Shaft (N) 220 250 300